Projects

RSS

Many museum buildings have incorporated systems that allow daylight to illuminate their galleries, but none as robustly as MAXXI, where almost every roof surface is glazed. To support such a roof above the museum’s winding galleries, whose bays average 40 feet wide, reinforced-concrete walls on either side sandwich a series of trusses. While these trusses run parallel to the gallery walls, transversal steel beams connect the walls. Originally conceived as a precast-concrete element, each of these longitudinal sections, typically six per bay, is composed of a steel truss encased in 1⁄2-inch-thick fiberglass-reinforced concrete panels. The nearly 8-foot-deep assembly, which rises

An expansion and renovation of St. Mary's Hospital anchored by a new 12-story, 200,350-square-foot patient bed tower with a cafeteria next door. 

Client: Roosevelt Warm Springs Institute for Rehabilitation & GFSIC Completion Date: September 2008 Program: A new two-story, 33,500-square-foot rehabilitation center that consolidates outpatient services, which had been scattered among existing buildings on the institute's campus. The gym and lobby span both levels; the first floor includes a diabetic foot clinic and a physicians' clinic. The second floor houses a seating and mobility clinic, a rehab technology office, a wheelchair shop, and an orthotics and prosthetics clinic and fabrication workshop. Design Concept and Solution: Charged with building a new gateway to the campus, the architects wanted the design to echo the

Health-care facilities typically use isolation as a strategy for dealing with infection control, creating buildings that work as sets of departments closed off from one another.

NewYork-Presbyterian Hospital’s dense web of mostly older buildings at its 20-acre campus in Upper Manhattan is not unusual for medical complexes constructed over many decades.

Client: Northwest Community Healthcare Completion Date: May 2010 Program: An eight-story, 225,000-square-foot addition to the hospital, with an 11,000-square-foot lobby, an emergency department, intensive care, private patient rooms, and medical/surgical and perinatal units. Design Concept and Solution: The architects sought to enhance both the safety and privacy of patients while standardizing rooms for ease of care. The triangular form of the tower—whose sharp tip stands in counterpoint to the hospital's International Style campus—shortens travel distances for staff. To boost efficiency and flexibility, each room is a standard size, with a consistent layout, and is equipped to serve intensive-care patients and

In designing St. Anthony, a privately funded hospital in the wooded area outside Seattle, the architects at Zimmer Gunsul Frasca (ZGF) asked themselves, “What would you want to see in a five-star hotel?” says ZGF interior designer, Anita Rossen.

Andre Kikoski Architect designs an elegant restaurant inside New York's Solomon R. Guggenheim Museum.

Ben van Berkel, principal of the Amsterdam-based architectural firm UNStudio, is known for his breathtakingly swoopy designs of sleek surfaces that never seem to end. The gleaming, aluminum-clad Mercedes-Benz Museum in Stuttgart, Germany, with its double-spiral-ramped concrete structure, convincingly argues the case [RECORD, November, 2006, page 128]. After completing that nine-story-high, 270,000 square-foot building, you might think that a 5,840-square-foot (gross) residential loft would be too rinky-dink a commission. Van Berkel argues otherwise: “I’m not interested as much in the scale of a project as with the program,” he explains. In this case, he was asked to design a loft